Packwell India Machinery

Description

 Containers moving on S.S. Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. “No container-No filling” system arrangement is standard features of the machine. The motor for filling is servo drive and conveyor drive is AC Motor with synchronized variable AC Frequency Drive. PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set.

Machine having inbuilt tank of 120 liters (approximately) which is connected with material storage tank with help of material transfer pump provide by packwell. Machine tank having LLC sensor (Liquid level controller) once tank full with material transfer pump stop transferring the material. Material transfer pump starts automatically after few seconds; the seconds can be set in HMI.

HMI is supported with Ethernet connection, with help of Ethernet cable (provide by packwell) connect your laptop with HMI and with help of Team viewer of Any desk, we will take online and give you online trouble shooting and give you solution of technical support.

Operation

Containers move on conveyor and stop below the filling nozzles at platform of machine, where motor operated Nozzle fill desire preset volume in container. Bottle guide is provided for precisely match for centering of container below nozzles to avoid spillage of liquid on container.

Description

 Containers moving on S.S. Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. “No container-No filling” system arrangement is standard features of the machine. The motor for filling is servo drive and conveyor drive is AC Motor with synchronized variable AC Frequency Drive. PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set.

Operation

Containers have to place manually below the filling nozzles at platform of machine, where motor operated Nozzle fill desire pre set volume in container. Bottle guide is provided for precisely match for centering of container below nozzles to avoid spillage of liquid on container.

Description 

Automatic two Head Servo Based Liquid  filling Machine Model: PSLF-20 with liquid level controller system in tank

Description 

 Containers moving on S.S. Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. “No container-No filling” system arrangement is standard features of the machine. The motor for filling is servo drive and conveyor drive is AC Motor with synchronized variable AC Frequency Drive. PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set.

Operation

Containers have to place manually below the filling nozzles at platform of machine, where motor operated Nozzle fill desire pre set volume in container. Bottle guide is provided for precisely match for centering of container below nozzles to avoid spillage of liquid on container.

Technical Specifications

Model

PSLF-20

Output/Hr*

1000 to 1800 Bottle Per hour (depending on material)

Number of head

2 Nos.

COMPONENT’s MOC

Component’s MOC

Fill Size***

50 ml to 2000ml

Valve Body

Special Viscous Type. / Chemical / Pesticides

Hopper Capacity

100 Liters

Working Pressure

6 Kg/Sq.Cm.

Working CFM

20 CFM

Description

 Containers moving on S.S. Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. “No container-No filling” system arrangement is standard features of the machine. The motor for filling is servo drive and conveyor drive is AC Motor with synchronized variable AC Frequency Drive. PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set.

Machine having inbuilt tank of 120 liters (approximately) which is connected with material storage tank with help of material transfer pump provide by packwell. Machine tank having LLC sensor (Liquid level controller) once tank full with material transfer pump stop transferring the material. Material transfer pump starts automatically after few seconds; the seconds can be set in HMI.

HMI is supported with Ethernet connection, with help of Ethernet cable (provide by packwell) connect your laptop with HMI and with help of Team viewer of Any desk, we will take online and give you online trouble shooting and give you solution of technical support.

Operation

Containers move on conveyor and stop below the filling nozzles at platform of machine, where motor operated Nozzle fill desire preset volume in container. Bottle guide is provided for precisely match for centering of container below nozzles to avoid spillage of liquid on container.

Description

 Containers moving on S.S. Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. “No container-No filling” system arrangement is standard features of the machine. The motor for filling is servo drive and conveyor drive is AC Motor with synchronized variable AC Frequency Drive. PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set.

Machine having inbuilt tank of 120 liters (approximately) which is connected with material storage tank with help of material transfer pump provide by packwell. Machine tank having LLC sensor (Liquid level controller) once tank full with material transfer pump stop transferring the material. Material transfer pump starts automatically after few seconds; the seconds can be set in HMI.

HMI is supported with Ethernet connection, with help of Ethernet cable (provide by packwell) connect your laptop with HMI and with help of Team viewer of Any desk, we will take online and give you online trouble shooting and give you solution of technical support.

Operation

Containers move on conveyor and stop below the filling nozzles at platform of machine, where motor operated Nozzle fill desire preset volume in container. Bottle guide is provided for precisely match for centering of container below nozzles to avoid spillage of liquid on container.

Description

Automatic Four Head servo liquid filling machine is precision built on Stainless steel (GMP MODEL) completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Working on Viscous principle the unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body.

Operation

Containers moves automatically on conveyor nozzles at platform of machine, where motor operated Nozzle fill desire pre set volume in container. Bottle guide is provided for precisely match for centering of container below nozzles to avoid spillage of liquid on container.

Technical Specifications

Model

PSLF-

Output/Min*

In 1000ML – 20 to 28 Bottles per minutes (depending on material)

IN 200ML – 40 to 48 Bottles Per Minutes

IN 750 ML – 30 to 35 Bottles Per Minutes

Number of head

4 Nos.

COMPONENT’s MOC

Component’s MOC

Fill Size***

50 ml to 5000ml

Valve Body

Special Viscous Type.

Hopper Capacity

200 Liters

Working Pressure

Kg/Sq.Cm.

Working CFM

20 CFM

Electric Specification**

1 HP / 430 Volts / 50 Hz (Conveyor)/Servo Motor 750 Watt

(1 HP if maximum volume is 1000 ml in single doze)

Machine Dimensions**

2135 mm (L) x 800 mm (W) x 1400 mm (H)

Case Dimensions

2335 mm (L) x 1000 mm (W) x 1600 mm (H)